|
1.Introduction:
Three anti-plastic packaging for the new type of wiring insulation
adhesive, compared with other similar products have the following
advantages:
1.
This product is a one-component,
room temperature curable silicon resin, cured with good mobility,
without adding solvent for PCB spray or brush coating, easy to use,
and environmentally.
2.
This product can be widely used in
the temperature range -40
℃
~ 180
℃
ambient temperature and can be used, without prejudice to its
excellent electrical characteristics.
3. This
product has good moisture-proof, anti-corrosion, anti-aging
properties, and a neutral cure, the curing process is not corrosive
circuit board.
4. This product is unique adhesion with the board, very suitable for the
recovery and repair circuit boards.
5. The products are widely applicable to
all types of electronic circuit board (PCB) surface insulation
coating.
2.General performance
|
Product
Name
|
HL-2001
Three anti-adhesive
|
|
Appearance
|
Colorless
transparent viscose liquid
|
|
Specific gravity
（25℃，g/ml）
|
0.9~1.1
|
|
Surface
Drying Time（25°C）
|
<10
|
|
Full cure timeh/mm
|
8~10
|
|
Gel content %
|
>99
|
|
Temperature
Resistance
Range（°C）
|
-40~180
|
|
Aging Resistance
|
Excellent
|
|
Medium Resistance
|
Excellent
|
|
Voltage
Resistance
|
>16kv/mm
|
|
K（1MHz）
|
2.9±0.1
|
*:Advantages: colorless, transparent, flexible film, good adhesion,
maintainability ...
3.Chemical Resistance Property
|
Days after
Weight Change%
Dipping liquid
|
1
|
7
|
30
|
|
City tap water
|
0.3
|
0.9
|
1.6
|
|
5%NaCl solution
|
0.2
|
0.7
|
1.5
|
|
10%NaOH solution
|
0.2
|
0.7
|
1.2
|
|
5%H2SO4
|
0.4
|
1.2
|
2.0
|
|
5%HCl solution
|
0.3
|
0.8
|
1.5
|
|
Kerosene
|
0.5
|
0.8
|
1.2
|
4.Application Method:
Dust and oil on the surface should be cleaned by using
cloth rubbing or organic solvents, prior to use;
the adhesive needs to be uniformly coated on the applied
surface or sealing ends and tightly connect together.
Air remained inside the tube should be squeezed out and
the tube cap needs to be tightly closed to protect from adhesive
curing.
5.7777.Storage and
Transportation
1.The product belongs to non-dangerous material. It is
non-toxic, non-corrosion, non-inflammable,.
Storage and transportation follow regular chemicals
regulation. The storage period of time see packaging instruction.
2. Product kept tight sealing after use.
WR-70 Series RTV Silicon Rubber Gel is non-toxic, but has
slightly irritation to skin and eyes.
Using gasoline etc. hydrocarbon solvents can clean
non-cured silicon rubber.
6.Storage and Packaging:
1. half one year shelf life stored at room temperature in
sealing condition.
1KG or 5KG in plastic drum.
|
